pepcak Posted December 13, 2020 Share Posted December 13, 2020 Hi, For my dash, I am looking for the lower part of the housing / cover that fits over gauges from inner side. Or a picture / sketch of. Also looking for an original spring that returns starter pedal lever. Or a picture / sketch of. Thanks for any help. Josef Link to comment Share on other sites More sharing options...
bigvic Posted December 13, 2020 Share Posted December 13, 2020 Hello, are you talking about the return spring that surrounds the starter petal shaft in the steel enclosure on top of the tranny? If so I should have one.. Link to comment Share on other sites More sharing options...
27donb Posted December 13, 2020 Share Posted December 13, 2020 1928 may be different, but for 1927 the top of the gauges has a shroud to direct the dash Guage lighting, and at the bottom there are just simple brackets to hold the gauges in place. Again for 1927, the starter pedal return springs on my cars in the housing on top of the transmission was rusted and broken, so I replaced the original spring with a stainless steel spring from McMaster Carr to prevent a repeat failure, since the spring does not show. 1 Link to comment Share on other sites More sharing options...
pepcak Posted December 27, 2020 Author Share Posted December 27, 2020 Hi, thanks for your replies. The dash is now clear to me. Sent PM to bicvic. Josef Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now