Dave39MD Posted December 11, 2020 Share Posted December 11, 2020 (edited) The rubberized fabric covered top my coupe is still in pretty good shape and the soft center section has been replaced. I am concerned it was not finished off properly. At the rear is the original hidum and at the front the aluminum crown molding that folds over like Bob's cm-291. My idea is that a strip of crown molding is missing from each side where you can see the sealer. There is a slight bead on each side of the original top material where it butts up to the soft cobra material. Does anyone know how this should be done? Pictures of the tops seem to be hard to find. Thanks Dave Edited December 12, 2020 by Dave39MD (see edit history) Link to comment Share on other sites More sharing options...
Dave39MD Posted December 13, 2020 Author Share Posted December 13, 2020 No suggestions or photos? I would think 56s, 66s, 96s would have been the same. Maybe 29, 30, 31, 32 the same? I found a picture of a 27 and that is not the same the center "soft top" runs from drip rail to drip rail. Thanks Dave Link to comment Share on other sites More sharing options...
Oldtech Posted December 14, 2020 Share Posted December 14, 2020 I'm going to say there should be a metal molding along the seam. Link to comment Share on other sites More sharing options...
Dave39MD Posted December 14, 2020 Author Share Posted December 14, 2020 (edited) Thanks Oldtech I am leaning that way, the only other choice would be hideum similar to what is at the back. Dave Edited December 14, 2020 by Dave39MD (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now