Mike0817 Posted November 29, 2020 Share Posted November 29, 2020 Trying to restore cushman truckster/haulster. I have put a new battery in it and all lights and horn work. But when I turn ignition key nothing happened. No click no noise ..nothing. the only thing that changes is the dash lights go out when I turn key to start. Just looking for any suggestions to start looking. Thank you Link to comment Share on other sites More sharing options...
dalef62 Posted November 29, 2020 Share Posted November 29, 2020 If it has a starter solenoid, check to see if you are getting power to the small terminal when you turn the key to the start position. If not I would suspect the wiring or the ignition switch. If you have power to the solenoid then I would suspect the solenoid or the starter. You could run 12 volts directly to the main connection of the starter. I am not familiar with Cushman scooters, so this may be way off. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now