Wood wheel Horn Bar

[abandg]

I cannot find any screws that hold the horn bar on the base. I know they are standard thread and was wondering if any one knew the thread size. Thanks Gene.

[RockinRiviDad]

I can pull one off of mine tomorrow & check for u if no one chimes in before then

[abandg]

Thanks Dave. Gene.

[RockinRiviDad]

So sorry for the delay, Gene. We are wrapping up a kitchen remodel & tools are scattered everywhere. I can only find my cheapo plastic thread gauge finder. If this doesn’t help, I’ll run to the hardware store with screw in hand & check on their gauge. Let me know

 

 

 

 

 

[abandg]

Dave, it looks to be a size 10 by 32 turns per inch by 15/16 unches long. Thank you very much, Gene. 

[RockinRiviDad]

👍🏼 No problem.

[60FlatTop]

On the topic of horn bars, when my '64 Riviera, someday, gets back into regular use, I plan to make a couple of thumbscrew locks to hold the bar tight to the steering wheel spokes to prevent it from moving and being broken by an unknowing occupant. I am not much of a car horn blower anyway.

 

Bernie