Barry R Posted November 14, 2020 Share Posted November 14, 2020 Just rebuilding my 1923 Buick engine, do I put some sealant (hermatite blue) on the head gasket ? There is also a thin 0005 paper like gasket between short cylinder block and crankcase. Should I put sealant on that as well? 1 Link to comment Share on other sites More sharing options...
Stude Light Posted November 14, 2020 Share Posted November 14, 2020 I like using Permatex Copper Spray a Gasket sealant on the head gasket. I might use a very thin layer of Permatex Ultra Black on the paper gasket. I would normally use Permatex Right Stuff on that paper gasket but it cures pretty quickly so you need to assemble it quickly if you use it. If you can get it together and bolted down in under 10 minutes, I would go the Right Stuff route. I hate having gasket leaks on a freshly assembled engine and these products have not let me down. Scott Link to comment Share on other sites More sharing options...
RansomEli Posted November 14, 2020 Share Posted November 14, 2020 I, too, swear by Permatex Copper sealant. Link to comment Share on other sites More sharing options...
Larry Schramm Posted November 19, 2020 Share Posted November 19, 2020 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now