rrs814 Posted November 8, 2020 Share Posted November 8, 2020 Grettings! I've been away for a while --- so the damn up/down button thing feels like it's fallen apart/broken inside. I have a full manual but thought I'd ask about any helpful "hints". I'm goin to wait until spring to take this on (no garage space for door dismantling). THANKS!!!!!! (1990 convertible) 1 Link to comment Share on other sites More sharing options...
tony1970 Posted November 8, 2020 Share Posted November 8, 2020 Hi the lock rod may have broken off the clip you have to remove the door panel. Link to comment Share on other sites More sharing options...
rrs814 Posted November 9, 2020 Author Share Posted November 9, 2020 Hey Tony. I did figure that to be the case. Just looking for any "experiences" that might simplify things. Thanks Link to comment Share on other sites More sharing options...
Ronnie Posted November 9, 2020 Share Posted November 9, 2020 Your first step is to take the door panel off. Instructions for doing that are here: Door Panel Removal Instructions The photo below shows what you will see inside. I think a vert is the same. The small rods you see in the left center of the photo are what operate the lock mechanism. You will just need to look it over and see what isn't working correctly and repair as needed. 1 Link to comment Share on other sites More sharing options...
DAVES89 Posted November 9, 2020 Share Posted November 9, 2020 That door clip is a very common part. As a matter of fact so common it is also used as the clip for the rod in the A/C/Heat blend door [located behind the glove box]... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now