wtb '34, '35, '36, '38 Crysler, Dodge, Desoto front leaf spring

[jim49 0]

I'm looking for a '34, '35, '36, '38 Crysler, Dodge, Desoto front leaf spring. It's for a tube axle. Actually, all I need is one leaf. It's the one below the two that form the front eye, and it's 33" long. I'm near San Diego, CA.  jtmapping@gmail.com. Jim. Thanks.

[keiser31 5,810]

Try here. They have all of the specifications....https://www.eatondetroitspring.com/

[DFeeney 66]

Hello, There are still a few spring shops around.  Usually working on trucks.  Take your broken leaf to them and see if they can make a new one.

[StillOutThere 150]

ESPO Springs 'n Things.   They also have all the specs, outstanding tech help on the order line.  They'd be happy to make your one leaf (or might rightly suggest you replace the other side at the same time).   Yes, I personally have used them multiple times and highly recommend.

 

[jim49 0]

That's good info from both of you. Thank you much. I'll give them both a call on Monday.

 

This spring is on an old beater of a utility trailer, which I'm just trying to keep going until I can build another one. When that's finished, I'd be interested in selling the springs and tube axle. Does anyone have an idea of the value of those items?

[jpage 416]

I think I still have a couple from a '36 Dodge sedan, if you're interested. 

[Rick Marsh 6]

Hello Jim,

 

I have the remains of a 1934 Chrysler Airflow model CU.  I'll check tomorrow as to whether the front springs are still on  the tubular axle.

[jim49 0]

Hi. Thanks for responding. Will you sell just one leaf, or do you want to sell the whole spring?

[jpage 416]

I'll check today and see if I still have them.

[Marty Roth 2,770]

On 11/7/2020 at 5:33 PM, StillOutThere said:

ESPO Springs 'n Things.   They also have all the specs, outstanding tech help on the order line.  They'd be happy to make your one leaf (or might rightly suggest you replace the other side at the same time).   Yes, I personally have used them multiple times and highly recommend.

 

 

I have also used ESPO Springs 'n Things, 

They have made up complete spring sets, coil, as well as leaf, for several of our cars,

as well as most other steering and suspension components-

best of all, everything I got was MADE IN THE USA

Edited November 21, 2020 by Marty Roth
typo (see edit history)

[jpage 416]

Sent an email several days ago, did you get it?

[jim49 0]

Hi jpage, Yes I did. Thank you very much for replying. I sent you a reply by email yesterday (Su, 11/15). Did you get that one? --Jim