One piece door window for Buick Riviera -63 -64 -65 WHO sell them ?

[MrY]

I my new Buick Riviera -64 (see pic) has one piece side windows

ie the Went window is removed and replace with a big ONE piece window.

I never seen that before and I been trying to google it but found no one who makes them or where they got it from .....

 

Anyone know who sells them or where to get them from ?

[rocketraider]

It's a GM E-body. Not 100% sure but a 66-70 E-body (Riviera, Toronado, Eldorado) door glass may work and might be what your window came from as those did not have vent windows. Someone who has a Hollander interchange manual can verify.

[MrY]

yeah I think you are right

here is a Passenger Front Door Glass for 66-70 Buick Riviera 2 Door

 

[MrY]

1970 OLDSMOBILE OLDS TORONADO RIGHT PASSENGER

[KURTRUK]

66-70 door glass is curved.  63-65 is flat glass.  Not an interchange.  A bit of work, but since it is flat glass, a competent long-time auto glass-shop can make a pattern and cut a new one for you.  Of course involves new channels,etc.  Plus regulator.  Easiest way around that is electric window setups from street rod companies.

[joe_padavano]

3 hours ago, KURTRUK said:

66-70 door glass is curved.  63-65 is flat glass.  Not an interchange.  A bit of work, but since it is flat glass, a competent long-time auto glass-shop can make a pattern and cut a new one for you.  Of course involves new channels,etc.  Plus regulator.  Easiest way around that is electric window setups from street rod companies.

 

^^^THIS. It's a custom build, as evidenced by the less-than-stellar job fabricating the longer trim along the top of the door. You'll need to have new glass custom cut to fit.