auburnseeker Posted October 29, 2020 Share Posted October 29, 2020 Looking for a decent Intake manifold with good bolt holes and gasket surfaces. Seems someone overtorqued mine and broke it at some point. The replacements i have found all have broken bolts and damaged gasket surfaces. Anyone with a good one, please contact me. Photos below are for reference. Mine is the smaller intake in the picture. Link to comment Share on other sites More sharing options...
auburnseeker Posted November 25, 2020 Author Share Posted November 25, 2020 Still looking for one. If you have a good clean one not needing any work other than cleaning and paint, I would be happy top pay $150 for it. Will consider a broken stud or two if there is meat left on them to get them out if it's a nice clean manifold otherwise. Link to comment Share on other sites More sharing options...
JACK M Posted November 25, 2020 Share Posted November 25, 2020 I bought a couple of Chrysler bumpers from this guy a few years ago. Was reasonable, his stuff was mostly Chrysler but might be worth asking. https://seattle.craigslist.org/tac/pts/d/vintage-mopar-parts-post-war/7233005967.html Link to comment Share on other sites More sharing options...
auburnseeker Posted November 25, 2020 Author Share Posted November 25, 2020 I'll give him a try. Thanks. Link to comment Share on other sites More sharing options...
JACK M Posted November 25, 2020 Share Posted November 25, 2020 Then there is this Yard down near Eugene that has a lot of old stuff, Hes not much into shipping big stuff. Again, might be worth as ask. Link to comment Share on other sites More sharing options...
JACK M Posted November 25, 2020 Share Posted November 25, 2020 Just now, JACK M said: Then there is this Yard down near Eugene that has a lot of old stuff, Hes not much into shipping big stuff. Again, might be worth as ask. I am about two hours from Eugene, Let me know if that helps. Link to comment Share on other sites More sharing options...
auburnseeker Posted November 25, 2020 Author Share Posted November 25, 2020 I appreciate the offer. I'll see if the first guy gets back to me then go from there. I gave him the casting number as well so maybe that will help him if he doesn't have one id'd. Link to comment Share on other sites More sharing options...
JACK M Posted November 26, 2020 Share Posted November 26, 2020 23 hours ago, JACK M said: I am about two hours from Eugene, Let me know if that helps. Guess I forgot this. https://eugene.craigslist.org/pts/d/springfield-plymouth-left-right-front/7208792350.html Link to comment Share on other sites More sharing options...
dpcdfan Posted November 27, 2020 Share Posted November 27, 2020 On 11/25/2020 at 9:25 AM, auburnseeker said: I appreciate the offer. I'll see if the first guy gets back to me then go from there. I gave him the casting number as well so maybe that will help him if he doesn't have one id'd. Can you send me the casting number. I probably have one. 1 Link to comment Share on other sites More sharing options...
auburnseeker Posted November 27, 2020 Author Share Posted November 27, 2020 Sure the casting number is 1311805. Sorry. I thought I put it in the ad. Thanks for looking. 1 Link to comment Share on other sites More sharing options...
dpcdfan Posted November 28, 2020 Share Posted November 28, 2020 (edited) On 11/27/2020 at 7:31 AM, auburnseeker said: Sure the casting number is 1311805. Sorry. I thought I put it in the ad. Thanks for looking. I'll check my parts. Should have one. Met you at Hershey several years ago, I'm a member of the Airflow Club. Edited November 28, 2020 by dpcdfan (see edit history) Link to comment Share on other sites More sharing options...
auburnseeker Posted November 28, 2020 Author Share Posted November 28, 2020 Appreciate the help. Link to comment Share on other sites More sharing options...
dpcdfan Posted December 1, 2020 Share Posted December 1, 2020 On 11/28/2020 at 3:11 PM, auburnseeker said: Appreciate the help. Got a good one dug out. 1 Link to comment Share on other sites More sharing options...
auburnseeker Posted December 1, 2020 Author Share Posted December 1, 2020 How are the surfaces that mate to the block? Any of the bolt holes stripped out, I can't quite see. Thanks for the photos, I'm interested. Link to comment Share on other sites More sharing options...
dpcdfan Posted December 2, 2020 Share Posted December 2, 2020 9 hours ago, auburnseeker said: How are the surfaces that mate to the block? Any of the bolt holes stripped out, I can't quite see. Thanks for the photos, I'm interested. I'll try and get some more pics tomorrow. Didn't look super close, but on quick inspection everything looked fine. Link to comment Share on other sites More sharing options...
auburnseeker Posted December 2, 2020 Author Share Posted December 2, 2020 Sounds good. Thanks for your help. Link to comment Share on other sites More sharing options...
dpcdfan Posted December 3, 2020 Share Posted December 3, 2020 17 hours ago, auburnseeker said: Sounds good. Thanks for your help. Checked the threads on the bolt holes and the surfaces that mount to the block. Everything checked out and looks good. 1 Link to comment Share on other sites More sharing options...
auburnseeker Posted December 3, 2020 Author Share Posted December 3, 2020 That looks like it will work. How do you want to proceed. Link to comment Share on other sites More sharing options...
dpcdfan Posted December 3, 2020 Share Posted December 3, 2020 8 hours ago, auburnseeker said: That looks like it will work. How do you want to proceed. If you can email me your address, I can get it packed and get a total including shipping. You mentioned $150 for a good manifold and that works for me. We can take PayPal if that works for you. Thanks! Gary 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now