motoringicons Posted October 14, 2020 Posted October 14, 2020 (edited) SOLD 2/4/2021 1915 Kuempel Red-I-Kut Model T Ford Speedster. This is a great and authentic Model T speedster with a known history and has had only four owners since it was built in St. Louis in the 1920s. From my research, this may be the only surviving original Kuempel boat tail speedster body in existence. This speedster was built by Francis A. Mesker in the early 1920’s using a body kit supplied by the Kuempel Hardware Company of Guttenberg, Iowa. The Mesker Family operated one of the largest architectural metal foundries in the Midwest and were prominent society members in St. Louis. This car was kept by the Mesker family till the 1980’s when it was donated to the St. Louis Museum of Transportation. The museum owned the speedster until 2005 when they sold the car at auction to a well-known St. Louis collector who owned it until last year. This car has many period modifications and accessories including the original Kuempel Red-I-Kut two-man speedster body with its matching hood, radiator, radiator shell and full frame skirting. The chassis has rare Rajo “self steering" spindles, lowered (underslung) front and rear end assemblies using original pieces which I believe are Morton and Brett, and four, matching 30 x 3 1/2" House wire wheels. The build of this car closely resembles the 1920s Secrets of Speed article by Murray Fahnestock ( Model T Speed Secrets: The Fast Ford Handbook pages 122-128) which discusses building a car with the Red-I-Kut body kit. Like most Model T speedsters, the Ford chassis components are a variety of years. It has a 1915 block with the casting date of 7-14-15 and an engine number of 851802. It has a clear and current title and is titled as a 1915 Ford. The engine is stock, although when I had the lower cover off, I discovered it has a counterbalanced crank shaft. This is a mostly original car that I do not believe has been disassembled since it was first built in the 1920s. At some point, the museum repainted it its current red color, but the insides of the body appear to be in original black paint. The inner wood structure is mostly original. The body is rock solid and tight. There are no rust or pitting issues on the body sheet metal or chassis components. During the past year, the car has been mechanically freshened including new wiring, cables, 12 volt battery, fuel system cleaning, a rebuilt Holley "straight thru" carburetor, replaced timer, radiator cleaned and checked, (does not overheat or leak), rebuilt and rewired headlamps and tail lamp, new front end bushings, etc etc. It starts instantly without any fussing and when warm gives lots of "free starts". The engine seems to run well with no objectionable noises or problems. The transmission shifts smoothly and quietly. Tires are old Ward Riversides but very serviceable with good tread and hold air just fine. The desirable House wire wheels are very nice. It has the original, extended removable hand crank and a wrench for the wire wheels. This is neat and rare car that could be used for a variety of events including HCCA tours or vintage racing. Authentic, period-built Model T speedsters are few and far between and those that exist are rarely offered for sale. The price is 22,500.00 but would consider realistic full or partial trades for another Model T, a Model A or other pre-WWII automobile. I have over 100 detailed photos I can mail to seriously interested parties and would be glad to show anyone the car. It is located near Detroit, MI. Please call 734-730-4274 or email directly at: motoringicons@hotmail.com for additional information or to schedule a viewing. Thank you. . Edited February 4, 2021 by motoringicons (see edit history)
motoringicons Posted November 6, 2020 Author Posted November 6, 2020 Still for sale or possibly trade. Here is a neat article and a really great website for speedster enthusiasts: https://www.classicspeedsters.com/blog/2020/10/21/the-red-i-kut-speedster
motoringicons Posted November 20, 2020 Author Posted November 20, 2020 (edited) On 11/10/2020 at 7:05 PM, Larry Schramm said: What is the red spanner wrench for? It is the wrench to remove the wire wheels. The two pins fit in recesses on the center nut and disengage the latch so it can be spun off. It is not an original wrench but it was made eons ago and works real well. Edited November 20, 2020 by motoringicons (see edit history)
motoringicons Posted January 9, 2021 Author Posted January 9, 2021 (edited) SOLD 2/4/2021 Edited February 4, 2021 by motoringicons (see edit history)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now