Rod Miles Posted October 6, 2020 Share Posted October 6, 2020 Can anyone identify this tube for me? I'm assembling a 28 Standard that was dis-assembled by someone else. I don't recognize this part and am curious if any of you know what it might be for? It's just over 4 inches in length, is 1/2 inch in diameter and has a pressed flange at one end. Any help is appreciated! Rod Miles Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted October 6, 2020 Share Posted October 6, 2020 Just guessing Rod, but does the oil dip stick fit in it, and does the tube then fit into the block? Link to comment Share on other sites More sharing options...
Rod Miles Posted October 6, 2020 Author Share Posted October 6, 2020 That is what I've wondered too. Dip stick definitely fits snug once in, and feels right. However, it's pretty tight to get the tube into the block. But I haven't tried to tap it all the way in. Thanks, Hugh. Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted October 6, 2020 Share Posted October 6, 2020 Rod, Here is a picture of my block upside down. Not sure if someone put a black rubber o ring on yours. I don't have that o ring. Hugh Link to comment Share on other sites More sharing options...
dracenroc Posted October 6, 2020 Share Posted October 6, 2020 Rod, looks like the oil gauge rod tube No 180434 1 Link to comment Share on other sites More sharing options...
Rod Miles Posted October 16, 2020 Author Share Posted October 16, 2020 That's it Hugh. Thanks! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now