ThugPug98 Posted October 1, 2020 Share Posted October 1, 2020 So the 351M I have in my tbird is giving out, and I have a 460 I want to put in. My big question is about the motor mounts, my current ones slide over the crossmember and the bolt slides through while I see 460 motor mounts are quite different. I see a set of aftermarket bundle mounts with two engine mounts that look like they slide over and the bolt through but it says its for a chevy so I dont know if they will work especially the tranny mount that it comes with for my C6. I could really use some help in finding something that will help Link to comment Share on other sites More sharing options...
Graham Man Posted October 1, 2020 Share Posted October 1, 2020 Do a google search 351 to 460 swap literally thousands of people have done this swap. Since you say you have a C6 guessing it is a 1970s Thunderbird? It will take a lot of research and time, most likely it would be less expensive to have your heads done, and purchase a short block. An investment in aluminum heads would most likely give you more HP than the 460, lots of options. Here is a good place to start... http://forum.grantorinosport.org/72-gts-460-swap_topic17083.html Link to comment Share on other sites More sharing options...
ThugPug98 Posted October 3, 2020 Author Share Posted October 3, 2020 Ive been looking and searching for at least a week and I cant find anything that shows promise. even conversion kits dont say much of how they will work or if at all/ all mounts I find arent the type my car has that fits over the frame for slide through bolts Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now