Jump to content

Front Bearings Inner New Departure 909703 1927 Model 27-27 McLauglin Buick


Recommended Posts

Other bearing threads--->

 

 

 

Not your part number-- https://www.abf.store/s/en/bearings/909702-NEW-DEPARTURE/362602

 

Do you have the dimensions? 

Then take it to an industrial bearing supplier.  Do not say its a car part: its just a bearing

 

Not applicable to 1920-1930's https://www.ahrinternational.com/HYATT-BALL-BEARINGS_nomenclature.shtml

 

 

Edited by 1939_Buick
added https://forums.aaca.org/topic/227547-1924-buick-front-wheel-bearings/ (see edit history)
Link to post
Share on other sites

When I was going thru the front axle for my 1925-25, I found that the outer races required only a single adapter on the bearing race to make a modern roller bearing fit.  For the inner bearing, I could not find a good replacement and I felt that I would need to make an adapter for both the inner cone and the outer race.  What complicated matters was the oil seal, as this is part of the bearing and that would need to be designed into the adapter.  Not a big job to do this, but something that would need to be done.  I just happened to be able to swap enough parts that I did not have to replace the inner bearings.   909703 fits all smaller Buicks 1922 thru 1928 so you have a wide range if you are looking for used bearings.   I also remember someone in the Chez Republic claiming to have old obsolete bearings, but this was a scam.      Hugh   

Link to post
Share on other sites

Download ND_1939_OCR.pdf.  Look at pages 92-95 and on. Has dimensions.

Is the April 1939 (13th edition) of the New Departure Handbook.

New Departure was a GM subsidiary- GM brand.

Take those dimensions to an industrial bearing supplier (not a car parts shop).

The complete assembly part number 909003 may or may not be available or have an equivalent; Timken etc

(I currently do not access to all my bearing -interchange books)

 

Untitled - Vintage Machinery Wiki

wiki.vintagemachinery.org › GetFile › ND_1939_OCR

Untitled - Vintage Machinery Wiki

 

Edit

More digging. Timken use the same part numbers

Edit 2

Another bearing catalogue to download

These can be very useful

https://archive.org/details/UnitedMotorServiceBallAndRollerBearingDataCatalog2056thEdition1920Through1930OCR88Pages

Edited by 1939_Buick (see edit history)
  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...