Iowa Don Posted September 25, 2020 Share Posted September 25, 2020 Working on a 29 Fargo with bad water pump. How do I remove the pully? is the pin just driven out? Is it tapered so will only go one way? Can I get a new bearing and does it have a replacable race? Advice please. Don Link to comment Share on other sites More sharing options...
ckowner Posted September 27, 2020 Share Posted September 27, 2020 Hi Don To the best of my knowledge the pin that goes through the hub of the pulley and the shaft can be driven out with a punch. The impeller can only be removed intact by machining the shaft out of it from the center on a lathe. I had a new stainless shaft made for my 1930 DeSoto. Once the pump is apart, new brass bushings can be installed. Rick Link to comment Share on other sites More sharing options...
robert b Posted September 28, 2020 Share Posted September 28, 2020 sintered bronze bushings NOT BRASS , they hold oil in them to lube the shaft . bob Link to comment Share on other sites More sharing options...
ArticiferTom Posted September 28, 2020 Share Posted September 28, 2020 Any help . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now