kreed Posted September 21, 2020 Share Posted September 21, 2020 I am looking for a transmission dip stick for a TH400 For my 66 GS . Don’t need the tube necessarily . Would appreciate any help . Thanks KReed ROA 14549 Link to comment Share on other sites More sharing options...
RivNut Posted September 22, 2020 Share Posted September 22, 2020 Ken, I don't know off the dipstick for a 1965 BJ ST400 would be the same but I have a dipstick in a transmission. The dipstick is broken off right at the top of the tube. But it still has the rubber seal and the stop for the seal. (Keeps junk out.) If it will do you any good, the full mark is 24" from the stop on the stick. Maybe until you find the correct one, you can use these measurements to find one that will work. Here are a couple of pictures. One picture is what I imagine is the part number. Ed Stuff stored in the shed doesn't get cleaned 😎 as you can see. Link to comment Share on other sites More sharing options...
kreed Posted September 22, 2020 Author Share Posted September 22, 2020 Hi Ed -thanks much for the reply. That is exactly what happened to mine this afternoon ! Checking the level and the ring broke off . That is the correct part number btw . My transmission is a BS but suspect they are all the same in that series . I’ll keep looking - gotta be one out there . Thanks KReed ROA 14559 Link to comment Share on other sites More sharing options...
jsgun Posted September 22, 2020 Share Posted September 22, 2020 Mine did the same, looking for a replacement also. I thought I read that a regular TH400 dipstick from any 400 works, but I haven't looked into it more. Link to comment Share on other sites More sharing options...
arnulfo de l.a. Posted September 22, 2020 Share Posted September 22, 2020 Mine did the same. I welded the handle back on Link to comment Share on other sites More sharing options...
kreed Posted September 22, 2020 Author Share Posted September 22, 2020 Thanks - gonna try the weld job while waiting to find another one KReed ROA 14549 2 minutes ago, arnulfo de l.a. said: Mine did the same. I welded the handle back on Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now