Jump to content

Chevrolet Tahoe shock absorber compressor socket


Recommended Posts

Hello, a friend is working on a 2001 Chevrolet Tahoe 5.3L v8, and disconnecting the plug from the shock absorber compressor, he realized that there were some unplugged wires and that something else came out of the plug by disconnecting it.
The problem is that there is no diagram to see where the wires are in the socket.
The socket is located behind the left rear wheel and this is the part of the vehicle harness that is unplugged.
Here is the outlet in question, he reconnected the wires so that they did not touch it
 
243273455_128597344_IMG-20200710-WA00001.jpg.c43913b15fa4698a35c08ae08e938bc01.jpg.d8db2ce6d7fe4271745dd12061df37ef.jpg
 
794051630_988035783_IMG-20200710-WA00011.jpg.73d614b9ec786c58087ab3131b10b0651.jpg.3240cf7ebe8737603ad76d17ee64b102.jpg
 
He would have liked a photo or a diagram of this socket or have seen the cables and their connections.
Thank you :) 
 
Link to comment
Share on other sites

Looks like that ring terminal was put on a cut black wire. You can see the other cut end above the gloved hand.

  • Like 1
Link to comment
Share on other sites

Are you asking if your friend put the wires/terminals back into the plug correctly?

  • Like 1
Link to comment
Share on other sites

Link to comment
Share on other sites

1 hour ago, Frank DuVal said:

Are you asking if your friend put the wires/terminals back into the plug correctly?

 

The wires were out of the socket before he worked on it.
That's why he would like a photo of this plug to reconnect correctly (in the right order) the wires in the plug.

 

1 hour ago, Frank DuVal said:

 

thanks for the link ;) , i am sending it to him to see if he finds what he needs.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...