jord Posted July 15, 2020 Share Posted July 15, 2020 Does anyone have the bushing dimensions for the brake and clutch pedals? My pedals are sloppy. Length with ID and OD. Prefer not to take them apart because the this would disabled the car. Found some on different sites but no info, just part numbers Link to comment Share on other sites More sharing options...
19tom40 Posted July 17, 2020 Share Posted July 17, 2020 You will probably need the bushings and the shaft 86H 2516. I could not find the dimensions or a P/N for 1939 pedal bushings in the parts catalog. I don't know of any way to to replace the bushings or repair pedal slop without taking the assembly apart. Link to comment Share on other sites More sharing options...
jord Posted July 17, 2020 Author Share Posted July 17, 2020 Thank's Tom, I will take it apart and see what I need. Hate buying the wrong parts and reordering, but in some instances it is the only way Link to comment Share on other sites More sharing options...
38ShortopConv. Posted July 18, 2020 Share Posted July 18, 2020 A machine shop is best to size a piece of bronze bushing off the shelf to suit shaft and pedal sizes, otherwise you could end up with tight or sloppy pedals again. Just my experience. Link to comment Share on other sites More sharing options...
jord Posted July 18, 2020 Author Share Posted July 18, 2020 Thanks' to both of you will take it apart Link to comment Share on other sites More sharing options...
Ken/Alabama Posted August 4, 2020 Share Posted August 4, 2020 I made a new shaft from clutch cross shaft and bushings. Same size as the Zephyr pedal shaft. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now