Mars Posted July 9, 2020 Share Posted July 9, 2020 Hi, I’m still trying to get the gas gauge working. Took the float out, seems to operate properly. But the gauge still pegs to full. Seems like a simple system, but still scratching my head. Thanks Link to comment Share on other sites More sharing options...
ckowner Posted July 27, 2020 Share Posted July 27, 2020 Looks like the DeSoto forum stalled at this one. Mars, the float has a small gear on the shaft that turns the variable resistor in the sending unit. You will have to measure the resistance with an ohm meter to see if it changes when it turns. Sounds like the resistor wire in your sending unit may be broken and touching ground. You will need a meter to find out what is going on. Can't fix these things by guessing 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now