Shakadula Posted December 9, 2002 Share Posted December 9, 2002 I am rebuilding the front end suspension and need to get the upper control arm (drivers side) out of the car. I need to remove the steering shaft (if that is the correct term) so I can access the bolds that hold the control arm. Do I remove the shaft from the power steering unit or from the firewall? Both? HELP? I know this is simple but I have never done this before and don't want to screw anything up. Thanks in advance. Link to comment Share on other sites More sharing options...
baking Posted December 9, 2002 Share Posted December 9, 2002 On my 70 I removed it from the firewall. If I remember correctly I had to take the bolt all the way out instead of just loosening it. I assume the 67 is similar. Make a note (mark) on how the shaft is oriented so you match the same splines up when you put it back together and your wheel is not crooked.baking Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now