(S) Posted June 17, 2020 Share Posted June 17, 2020 This car has a frame X member that seems to stick up past the 'plane' of where the floor should be. ANyone know if the floor had a notch cut out for it, or do we just shim the body higher? It has a 1/8 th rubber shim only all the way around.... This is the X member/ driveline loop, near the rear passenger floor. Thanks in advance. Link to comment Share on other sites More sharing options...
studerex Posted June 17, 2020 Share Posted June 17, 2020 Yep, notch in wood with a metal plate over to hole. Link to comment Share on other sites More sharing options...
(S) Posted June 18, 2020 Author Share Posted June 18, 2020 (edited) !! Thanks !! I started to fit the body with 1/4 inch rubber pads. They are on the soft side and wondered how high the body should sit. At the rear of the car, the gas tank filler panel / cover won't clear the gas filler/ slide under the body.. I was thinking to just shim it with something with less squish , then that X member wont be so high. Edited June 18, 2020 by (S) (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now