Dynaflow help

[fastdrink]

Hi guys, Just trying to get information about my dynaflow  Transmission in my 63 Riviera it was not going into park I went underneath and noticed that the equalizer bar had came out of position.I  was wondering is there a bushing on the bracket or anyway To secure it, just seems to slide in the whole Without any way of locking it down thanks

 

 

 

[Jim Cannon]

Look in shop manual, see what they show.

 

I would have to go crawl under my car to see what's there.

 

[RivNut]

I snugged up the shifter rods on my 63 by using a Mr. Gasket set of bushings designed for four speed manual transmissions.  Don't ask for a part number, it was some time ago.😎

[CheezeMan]

I snugged up my shifter linkage with a cheap grommet assortment kit you can prob get anywhere. Found what I needed and it is working so much better now.

Before either Park or Reverse wouldn't engage. Now, all quadrants work as they should. Of course had to adjust the shifter rod connection. Do so from Park, according to the manual.

In my case, it was 125-Piece RAMPRO #2390. UPC 815518023904. You can search for that UPC number and find it.

Edited June 4, 2020 by CheezeMan (see edit history)

[RivNut]

I was looking for something  the other day a found the package and a couple of extra bushings.  They were Mr Gasket #11.  Here's a picture of the pieces from the internet