Generator/Distributor Identity Sought

[hddennis 160]

Newly Acquired 1917 Maxwell 1Ton truck owner seeking help sent me this photo and I don't think the unit on the right side of his motor came from the Maxwell factory but was retrofitted by some mechanic later. Does anybody recognize what this came off and who made it?

Thanks for looking,

Howard Dennis

Edited April 18, 2020 by hddennis (see edit history)

[1912Staver 1,244]

My first step would be to very thoroughly clean and inspect the entire outside of the unit. There is bound to be some sort of I.D. or manufacturer stamping on it somewhere. It might be a good idea to carefully remove the unit for closer examination , but it can also be done in place.

Once you have a general Idea of what it is you can try to pin down an exact I.D.

 

Greg in Canada

[oldford 166]

From the photo, looks to be Northeast, possibly from Dodge Bros. But as Staver said, should be a label with mfg name on it...

 

Frank

[jan arnett (2) 190]

not dodge or Durant or moon

 

[Old buicks 2 50]

The cap appears to be a Northeast cap that was only used on Reo for about 2 years.    Can he pop the dist cap and let us peek at the points?

[hddennis 160]

Thanks for the advice guys I'll pass it along. Old Buicks 2 I'll ask if he can send another picture as per your request.

 

Howard Dennis

[Isaiah 34]

Be careful some of those distributors are pot metal and with its age they  break easy

I have herd of the V.W. air cooled engine can be  adapted to work .

[startergenrebuilder 20]

That is a Remy unit. I restored one off a 1921 REO firetruck and will try and post a picture here shortly. Let me know if you need anything else or any more information.

-Jason

[startergenrebuilder 20]