Terry Bond Posted April 9, 2020 Share Posted April 9, 2020 Picked up a couple of unknown steering columns recently with a load of early British parts, so suspect this may be from a British (or at least foreign) made car. They guy had a lot of other stuff laying around and has had a number of sports cars and custom built stuff over the years. Seemed like every one of them left a few pieces behind. The length of this from the edge of the housing to the threaded end where the steering wheel attached is 25 1/4 inches. No markings on it other than what is shown in the photo, but I can supply additional pics if needed to confirm an identify. So-what's it fit??? Thanks in advance, Terry Link to comment Share on other sites More sharing options...
oldford Posted April 10, 2020 Share Posted April 10, 2020 The frame mount is very similar to a Model T Ford... Frank Link to comment Share on other sites More sharing options...
Mark Wetherbee Posted April 10, 2020 Share Posted April 10, 2020 35 minutes ago, oldford said: The frame mount is very similar to a Model T Ford... Frank I thought that too, but the arm is rotating wrong... would work for a speedster though! Link to comment Share on other sites More sharing options...
1912Staver Posted April 10, 2020 Share Posted April 10, 2020 It looks like it is configured for Right Hand drive, further supporting your British suspicions. Greg Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now