Mssr. Bwatoe Posted March 25, 2020 Share Posted March 25, 2020 I have struggled to reinstall vibration dampner, and always ended up with a little hammer action to move some--- here is a puller / pusher and loot at the neat manifold flange mount plate for engine stand.... any body got these to sell??? 1 Link to comment Share on other sites More sharing options...
Mssr. Bwatoe Posted March 25, 2020 Author Share Posted March 25, 2020 (edited) here is my shop all 3ft apart to avoid the Virus!! Edited March 25, 2020 by Mssr. Bwatoe (see edit history) Link to comment Share on other sites More sharing options...
Cokekid Posted March 25, 2020 Share Posted March 25, 2020 Mssr,Bwatoe Here is a Engine Stand Adapter my neighbor and I made. We used 1/4 " plate steel and welded it to a 2" pipe. I made a pattern of were the holes were to be drilled. I was lucky that he understood angles as the pipe had to cut just so as to match the one side of the plate. Here are a couple of photos of what we did. Gerry Link to comment Share on other sites More sharing options...
Mssr. Bwatoe Posted March 26, 2020 Author Share Posted March 26, 2020 that is sweet! 1 Link to comment Share on other sites More sharing options...
abelincoln Posted March 26, 2020 Share Posted March 26, 2020 Wish we could purchase at the original parts list. Thanks for the wish list. Abe Link to comment Share on other sites More sharing options...
dxod Posted March 29, 2020 Share Posted March 29, 2020 Stumpy's Fab Works makes an engine stand adapter for V-12. FFESA -SHV12. https://www.stumpysfabworks.com/ Dan 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now