Rod Miles Posted March 25, 2020 Share Posted March 25, 2020 I'm restoring a 1928 Buick Standard County Club Coupe. In dis-assembling the engine I found 4 broken lifter springs. These are the springs that go over the push-rods and are held in place with a c clip at the bottom and bolt in flanges on the top. I've been un-able to locate any of these springs to replace. My question is, are these absolutely necessary to be installed? It seems the valve spring pressure would be enough to keep all in place with the necessary pressure however, I could use advice. Thanks, Rod Miles #48784. Link to comment Share on other sites More sharing options...
Roger Barrett Posted March 25, 2020 Share Posted March 25, 2020 They need to be there. I have spares. Email me at bcanumber99@yahoo.com Erik Link to comment Share on other sites More sharing options...
KHenry Posted September 24, 2021 Share Posted September 24, 2021 email sent to Roger Barrett regarding springs. thanks in advance Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now