Forgot your password?
Gary_Ash, January 20 in Studebaker, Erskine & Rockne
I should have it. Just did this one.
I thought I had pasted some text in the previous post, but it disappeared. Here is the list of parts I am looking for:
177339 Yoke, clutch release, used on 1934-37 Presidents and 1934-35 Commander 8’s.
189255 Shaft, clutch release [Note: 1934-46 parts book has this wrong, doesn’t show part for LHC cars; 1929-40 book shows it correct.]
191231 Cover, valve spring (rear) used on 1938-42 Presidents (4C-8C)
191227 Tube, engine breather used on 1938-42 Presidents
191233 Screw, to valve cover 3/8-16 x 5-7/8 used n 1938-42 Presidents (4C-8C)
The Cover, Tube, and Screw are circled in the diagram above. The parts catalogs don't have good drawings of the yoke and shaft, but the shaft is mostly a straight, round shaft with a couple of keyways in it, the yoke has two fingers, slides onto the shaft.
I guess I should call the factory and have them correct the error in the parts catalog...
Rex came through with the cover, tube, and screw. Bob Kapteyn says he has the yoke. Now I just need the clutch release shaft.
I said I may have the yoke.
Have to find it , it was in my computer list but sometimes I sell something
and forget to write it off.
I am not going to the warehouse until next week when it warms up a little.
I have several 250 engines , one is 1931 one 1932 and one 1933 which is in sad shape .
I still have not inventoried the straight eight bearings.
waiting for a nice 76 degree sunny day.
It cost more to heat that huge building than I sell in a month.
I have a number of clutch release shafts with no parts numbers so if anyone has a picture of 189255 , I can compare with what I have.
You need to be a member in order to leave a comment
Sign up for a new account in our community. It's easy!
Already have an account? Sign in here.