Jolly_John Posted January 15, 2020 Share Posted January 15, 2020 (edited) Let's do a PRICE REDUCTION on this nice Riviera molding. This is a pretty decent, 1963-1965 Rivera driver's side rear wheel opening molding. It is a take-off from a nice Riv. parts car about 30 years ago. Good inside storage all these years. This trim piece has only light scratches here and there from normal wear, when it was in use on the Riv. Nothing from abuse or an accident. The proper, light buffing will easily take these out. There is one minor, shallow ding at the lower rear of this molding. It is small, and on the flat area of the piece, so it can easily be worked out from behind, if desired. I've included a close-up photo of this small, shallow depression. I'm a picky sort, but consider this wheel opening molding good enough to use, as-is, on a nice driver Riv. For show, the tiny dent should come out, and the piece should be buffed. The price is REDUCED to $75, plus the shipping. Thanks for looking. John Edited January 25, 2020 by Jolly_John (see edit history) Link to comment Share on other sites More sharing options...
Jolly_John Posted January 25, 2020 Author Share Posted January 25, 2020 PRICE NOW LOWERED ti $75, plus the shipping. Thanks for looking again. John Link to comment Share on other sites More sharing options...
Jolly_John Posted February 4, 2020 Author Share Posted February 4, 2020 I still have this one, Gang. Thanks. John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now