LongTraveler

Parts interchangeability question

Recommended Posts

I just purchased quite a few parts from a gent that had a late 47 Chrysler Traveler that was damaged beyond repair by a tree falling on it. Since I have a 48 Traveler that I am (slowly) restoring I bought all the bits and pieces he had left from it. I believe that the body parts and most other parts are the same as the standard 4 door sedans with the exception of badges, dash trim etc... specific to the Traveler. 

So if I have say a brake drum or the stainless trim or pot metal trim, bumpers etc... what years will those parts fit on?

There are quite a few parts that I won't be needing so knowing what years they should fit will help me in selling the extras,

Dave

1948 Chrysler Traveler.JPG

1948 Chrysler Traveler (rear).JPG

  • Like 1

Share this post


Link to post
Share on other sites

46, 47 and 48 are all pretty much the same.

HOWEVER !!! eight cylinder cars are longer.

Longer Chassis, longer hood and front fenders.

The grill and front trim are the same, not sure about the hood trim but I would suspect that at least the top center piece would be different.

Pretty sure everything behind the cowl will be the same.

Couldn't say about the brake parts but someone here will chime in.

If you should happen across a non pitted hood mascot, trunk brake light housing or an original cowl mounted rear view mirror I would be interested.

I have pitted up stuff excepting for the mirror which I need one of,  preferably drivers side.

 

 

032.jpg

001.JPG

Edited by JACK M (see edit history)
  • Like 1

Share this post


Link to post
Share on other sites

As far as the brake and front end parts are concerned...

The 6 cylinder suspension and brake stuff will NOT fit an 8 cylinder car. The 8's used a heavier/larger brake/front end setup.

Also, the 6 cylinder Town & Country sedans used 8 cylinder components as well.

What Jack said about the hood/fenders for 8's & 6's is correct , too.

Share this post


Link to post
Share on other sites

Hello Dave

As Jack said all 46,47 and 48 have same parts. I’m owner of a Windsor 47 and Town and Country 46 and need parts for both. If you want to sell some parts contact me.

Dominique

Share this post


Link to post
Share on other sites
6 hours ago, Domi said:

Hello Dave

As Jack said all 46,47 and 48 have same parts. I’m owner of a Windsor 47 and Town and Country 46 and need parts for both. If you want to sell some parts contact me.

Dominique

Tell us what you need as far as parts go.

Share this post


Link to post
Share on other sites

I need :

 

Bumpers 

Radio antenna 

Shift and cool vent  Knobs lucite 

Front Park light lenses

Window crank flipper handle 

Carburetor e7a1 

Side view mirrors Jay Fisher 

Door glove box 

 

thanks

Share this post


Link to post
Share on other sites
On 1/16/2020 at 2:15 PM, Domi said:

Hello Dave

As Jack said all 46,47 and 48 have same parts. I’m owner of a Windsor 47 and Town and Country 46 and need parts for both. If you want to sell some parts contact me.

Dominique

Sent you a Private Message

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now