dpcdfan Posted December 28, 2019 Share Posted December 28, 2019 I cleaned out the estate of a longtime Chrysler restorer and an original member of the WPC Club. In the process got quite a few original 31 Chrysler CD8 mechanical and trim parts as well as reproduction castings done many years ago. Everything from engine and transmission parts to a 31 deluxe frame with 17" wheels. Have way to many pictures to post here, but I can send along aklong additional pics to interested buyers. Link to comment Share on other sites More sharing options...
keiser31 Posted December 28, 2019 Share Posted December 28, 2019 (edited) I could use a couple of those football-shaped bumper clamp washers. PM me for a price, please. John Edited December 28, 2019 by keiser31 (see edit history) 1 Link to comment Share on other sites More sharing options...
dpcdfan Posted December 28, 2019 Author Share Posted December 28, 2019 Hi John, What is the length from top to bottom and how many do you need? As I recall, the ones I have are a little smaller than the CD8 ones. Probably correct for other 31's including CM, and Dodge with double bar bumpers. Link to comment Share on other sites More sharing options...
keiser31 Posted December 28, 2019 Share Posted December 28, 2019 (edited) 10 minutes ago, dpcdfan said: Hi John, What is the length from top to bottom and how many do you need? As I recall, the ones I have are a little smaller than the CD8 ones. Probably correct for other 31's including CM, and Dodge with double bar bumpers. Probably the same as the CM6 items. Mine are 4 1/4" long x 1" wide with a hole that is 17/32" i.d. I could use three of them. Thanks. Edited December 28, 2019 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
dpcdfan Posted January 4, 2020 Author Share Posted January 4, 2020 On 12/28/2019 at 12:59 PM, keiser31 said: Probably the same as the CM6 items. Mine are 4 1/4" long x 1" wide with a hole that is 17/32" i.d. I could use three of them. Thanks. Hi John, Mine are 3 1/2" long. Link to comment Share on other sites More sharing options...
keiser31 Posted January 4, 2020 Share Posted January 4, 2020 Thank you so much for checking. 1 Link to comment Share on other sites More sharing options...
SparkEE Posted January 5, 2020 Share Posted January 5, 2020 Long shot, because it’s not a CD, but I’m looking for any freewheeling equipment (especially the vacuum canister) for a 1933 Chrysler CQ eight. Any chance you have that? Link to comment Share on other sites More sharing options...
ckowner Posted January 5, 2020 Share Posted January 5, 2020 Hi there I would be interested in 2 of the spare tire hold down clamps. You show them on the 16th picture down. The ones I need a hole in them for the clamp down screw. I could drill a hole to make them work. could you send me a side and bottom view picture with a measurement and price. Thank you so much! Rick VanOene 1930 DeSoto CK6 coupe Link to comment Share on other sites More sharing options...
Gunsmoke Posted January 6, 2020 Share Posted January 6, 2020 dpcdfan, I sent you a pm. Thanks. Link to comment Share on other sites More sharing options...
dpcdfan Posted January 7, 2020 Author Share Posted January 7, 2020 (edited) On 1/5/2020 at 1:28 PM, ckowner said: Hi there I would be interested in 2 of the spare tire hold down clamps. You show them on the 16th picture down. The ones I need a hole in them for the clamp down screw. I could drill a hole to make them work. could you send me a side and bottom view picture with a measurement and price. Thank you so much! Rick VanOene 1930 DeSoto CK6 coupe Hi Rick, Were you talking about the 6 pieces across the middle or the two at the top and bottom? The 3rd one from the right in the center is original, the rest are reproduction castings in brass.These castings were done about 30 years ago amd were for several cars the gentleman owned. Including a 28 Chrysler Model 72, a 31 desoto roadster(which I currently own), 31 Chrysler Model CD8 and CM 6, 32 Chrysler CP8 and 33 Dodge. Edited January 7, 2020 by dpcdfan (see edit history) Link to comment Share on other sites More sharing options...
dpcdfan Posted January 7, 2020 Author Share Posted January 7, 2020 On 1/4/2020 at 11:45 PM, SparkEE said: Long shot, because it’s not a CD, but I’m looking for any freewheeling equipment (especially the vacuum canister) for a 1933 Chrysler CQ eight. Any chance you have that? Do you have any pics? I do have some vacuum freewheeling transmissions and parts. Link to comment Share on other sites More sharing options...
SparkEE Posted January 7, 2020 Share Posted January 7, 2020 (edited) 10 hours ago, dpcdfan said: Do you have any pics? I do have some vacuum freewheeling transmissions and parts. Here are some pictures from the web, but I may have some better pictures if I can locate them. I’m looking for the vacuum canister pictured in the lower left by the cowl (red in one picture and black in others, below), the pie shaped valve up near the carburetor, or really any of the vacuum or linkage components. Edited January 7, 2020 by SparkEE Remove pic with personal info (see edit history) Link to comment Share on other sites More sharing options...
ckowner Posted January 8, 2020 Share Posted January 8, 2020 I am interested in two of the spare tire clamps. Two of the six across the middle. You can send me a PM with price and shipping to Surrey, BC, Canada. I have a 1930 DeSoto CK coupe, so the should be the right ones. Maybe a side view with a measurement would be great just to confirm. Thank you Rick Link to comment Share on other sites More sharing options...
dpcdfan Posted January 8, 2020 Author Share Posted January 8, 2020 6 hours ago, ckowner said: I am interested in two of the spare tire clamps. Two of the six across the middle. You can send me a PM with price and shipping to Surrey, BC, Canada. I have a 1930 DeSoto CK coupe, so the should be the right ones. Maybe a side view with a measurement would be great just to confirm. Thank you Rick Rick, I'll get you some measurements. Gary Link to comment Share on other sites More sharing options...
dpcdfan Posted January 8, 2020 Author Share Posted January 8, 2020 On 1/4/2020 at 11:45 PM, SparkEE said: Long shot, because it’s not a CD, but I’m looking for any freewheeling equipment (especially the vacuum canister) for a 1933 Chrysler CQ eight. Any chance you have that? I'll check and get back with you. On the pics you sent the 33 air cleaner looks like one I got with the CD8 parts. Do you have yours and if so can you take some measurements? Here's some pics of mine. Link to comment Share on other sites More sharing options...
SparkEE Posted January 8, 2020 Share Posted January 8, 2020 Mine is a bit different in appearance, and is in storage so it will be a bit before I can get to it. Link to comment Share on other sites More sharing options...
dpcdfan Posted January 10, 2020 Author Share Posted January 10, 2020 On 1/7/2020 at 7:17 AM, SparkEE said: Here are some pictures from the web, but I may have some better pictures if I can locate them. I’m looking for the vacuum canister pictured in the lower left by the cowl (red in one picture and black in others, below), the pie shaped valve up near the carburetor, or really any of the vacuum or linkage components. I have 2 units. Here's pictures of each. Link to comment Share on other sites More sharing options...
dpcdfan Posted January 10, 2020 Author Share Posted January 10, 2020 On 1/7/2020 at 4:36 PM, ckowner said: I am interested in two of the spare tire clamps. Two of the six across the middle. You can send me a PM with price and shipping to Surrey, BC, Canada. I have a 1930 DeSoto CK coupe, so the should be the right ones. Maybe a side view with a measurement would be great just to confirm. Thank you Rick Hi Rick, Here's a picture of the sidemount clamps. The bottom one is an original and the upper, which is slightly larger do to the casting process, is on top. Link to comment Share on other sites More sharing options...
SparkEE Posted January 11, 2020 Share Posted January 11, 2020 8 hours ago, dpcdfan said: I have 2 units. Here's pictures of each. PM sent Link to comment Share on other sites More sharing options...
jukejunkie1015 Posted February 26, 2020 Share Posted February 26, 2020 On Monday I received my CD-8 De Luxe sedan and my parts list is started and keeps growing I have a master parts book ordered but have not seen it yet so I can not give you exact names or part numbers 1.Base of steering column throttle linkage, spring, stop plate, and light harness control arms. 2. Your air cleaner looks like the one I need. 3. Dual side mount locking clamps. That is only a start. Let me know if any of these are available or still for sale. Thanks Kurt Link to comment Share on other sites More sharing options...
dpcdfan Posted February 29, 2020 Author Share Posted February 29, 2020 On 2/26/2020 at 11:11 AM, jukejunkie1015 said: On Monday I received my CD-8 De Luxe sedan and my parts list is started and keeps growing I have a master parts book ordered but have not seen it yet so I can not give you exact names or part numbers 1.Base of steering column throttle linkage, spring, stop plate, and light harness control arms. 2. Your air cleaner looks like the one I need. 3. Dual side mount locking clamps. That is only a start. Let me know if any of these are available or still for sale. Thanks Kurt Hi Kurt, Sorry, just now saw your post. I have pictures of two different air cleaners, either one $250. I have a couple different styles of side mount clamps. Let me know which picture has the ones you're looking for. Thanks, Gary Link to comment Share on other sites More sharing options...
SparkEE Posted March 1, 2020 Share Posted March 1, 2020 On 1/10/2020 at 8:27 AM, dpcdfan said: I have 2 units. Here's pictures of each. Everything arrived very well packed, thanks! 1 Link to comment Share on other sites More sharing options...
dpcdfan Posted March 1, 2020 Author Share Posted March 1, 2020 5 hours ago, SparkEE said: Everything arrived very well packed, thanks! 1 Link to comment Share on other sites More sharing options...
Kennysingleton Posted March 31, 2021 Share Posted March 31, 2021 Hi I have a 31 cm6 I am thinking about buying some spare parts fenders bumpers running boards I would like to get 1 of the speedometers do you have anything left 804 296 8729 Kenny Link to comment Share on other sites More sharing options...
32CL33 Posted April 10, 2021 Share Posted April 10, 2021 Looking for usable set of brake drums and folding trunk rack. clancyjm1@comcast.net Link to comment Share on other sites More sharing options...
Miguel Aravena Posted May 13, 2021 Share Posted May 13, 2021 I need Engine, Transmission, Front Axle, Rear axle, Steering box and these all parts for instrument cluster, 1931 Chrysler CD8 Take contact with me please. Link to comment Share on other sites More sharing options...
Miguel Aravena Posted May 13, 2021 Share Posted May 13, 2021 I need engine, transmission, front & rear axles, instrument cluster for 1931 CD8 Chrysler. dpcdfan please take contact with me for these parts. If someone have these parts, please take contact with me too. miguel.1967.acuario@gmail.com Link to comment Share on other sites More sharing options...
vintchry Posted May 14, 2021 Share Posted May 14, 2021 what series CD? First, Second or Third? Axles, wheels and engine bores are different, as are some gauges 1 Link to comment Share on other sites More sharing options...
dpcdfan Posted May 14, 2021 Author Share Posted May 14, 2021 17 hours ago, Miguel Aravena said: I need engine, transmission, front & rear axles, instrument cluster for 1931 CD8 Chrysler. dpcdfan please take contact with me for these parts. If someone have these parts, please take contact with me too. miguel.1967.acuario@gmail.com Miguel, I sent you an email. Link to comment Share on other sites More sharing options...
dpcdfan Posted May 14, 2021 Author Share Posted May 14, 2021 On 4/10/2021 at 6:33 AM, 32CL33 said: Looking for usable set of brake drums and folding trunk rack. clancyjm1@comcast.net Sent you an email. Regards, Gary 1 Link to comment Share on other sites More sharing options...
Soupiov Posted February 6, 2022 Share Posted February 6, 2022 Gary would you by chance still have 2 of the spare tire hold down clamps you posted a couple of years ago. I am looking for them for my '30 Plymouth. Link to comment Share on other sites More sharing options...
Miguel Aravena Posted May 30, 2022 Share Posted May 30, 2022 Hi Gary Do you still engine, tansmission and rear axle for 1931 Chrysler CD8? Please, let me know. I am interested in these parts. miguel.1967.acuario@gmail.com Miguel Aravena Link to comment Share on other sites More sharing options...
dpcdfan Posted May 31, 2022 Author Share Posted May 31, 2022 On 2/6/2022 at 1:44 PM, Soupiov said: Gary would you by chance still have 2 of the spare tire hold down clamps you posted a couple of years ago. I am looking for them for my '30 Plymouth. I may still have them. Please remind me what they look like and I'll check. Thanks! Link to comment Share on other sites More sharing options...
dpcdfan Posted May 31, 2022 Author Share Posted May 31, 2022 5 hours ago, Miguel Aravena said: Hi Gary Do you still engine, tansmission and rear axle for 1931 Chrysler CD8? Please, let me know. I am interested in these parts. miguel.1967.acuario@gmail.com Miguel Aravena Hello Miguel, I have a core CD8 engine that will need rebuilding along with a complete transmission. Not sure on a rear axle. Regards, Gary netpartsinc@roadrunner.com Link to comment Share on other sites More sharing options...
Miguel Aravena Posted June 8, 2022 Share Posted June 8, 2022 Thanks Gary I will writing to you Miguel Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now