Jump to content

Part number help??


Zimm63
 Share

Recommended Posts

Looking for a new output yoke for my 63 with a Dynaflow.    Thought I found one and it does fit the spline, but every other dimension is off.  Width, reach, bore size, type of clip.  

 

Looking at the parts book I got from Jim Cannon, I don't see it in the propeller shaft section or the transmission section.  Am I missing it, or is it somewhere else?  The one I have is marked PN 1352655 but that does not match up to the one that came out of the car.  

 

 

Link to comment
Share on other sites

I have not found a number on my yoke.  Haven't looked either, but will.  

 

The one I bought was in a GM box with a hand written 1352655 number.  Supposed to be 61-63 Buick Dynaflow 401-425.  Beautiful new part.  Splines fit.  Width of the yoke is wider, depth of the yoke is shorter, bores for the bearing caps are smaller by a hair, and its set up for snap rings on the outside of the bearing caps instead of the clips on the inside of the caps.   

 

Were there Dynaflow applications that used Spicer U Joints?  

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...