(S) Posted September 22, 2019 Share Posted September 22, 2019 Making more space and I have a 1928 Serial # 1427942 frame, chassis, engine , and parts from it to get rid of. The engine is GE 18967 a large looking 6 cylinder. I'll be parting it out since the thing did not sell 'whole' It has most of a crusty engine, bad manifold, no carb. It has some good engine side covers, maybe even the crank. it has a head, GEN, STarter, Oil pump, and misc parts. it has a bell housing, no flywheel or clutch. The frame is good- , chassis, brakes, are mostly there. it has good looking front drums and all of the brake bits look fine, - I need a spec. so I can Mic the drums for you. They are smooth and nice- but how nice? Right fender, fender brace/ headlight bar, engine side metal, right running board brackets, right side metal, gas tank are also 'present' but rough. The differential is all there, and may not turn, but I hope the axles come out and are good -- the Fender, side panels, crank, axles and some of these parts still need removal and need inspection before selling. Also have other parts. Will trade for 1932 Commander Model 71 parts. Looking for tail light, bracket, left rear 1/4 glass interior window moulding, fender lights, front bumper, hood center hinge 'strip' / molding, front end cap for it. Link to comment Share on other sites More sharing options...
(S) Posted September 29, 2019 Author Share Posted September 29, 2019 I have the front drums off, they Mic at 12 1/32nd and are smooth and usable as is for probably quite a few more miles. The brake hardware and shoes are also nice, the shoes need re-lining. I have 1 wheel with dented hub cap Yard art The headlight bar is good with hardware. The wheel bearings, races and (Rim ) wheel locks also look good. It has a decent looking cylinder head, Accessory drive 'housing' oil pump, And a bunch of other good stuff. Working on the crankshaft, oil pan , engine side covers gas tank and then final disposal pretty soon ( Scrap ) Link to comment Share on other sites More sharing options...
GE Dictator 1928 Posted October 31, 2019 Share Posted October 31, 2019 Hi, Where are you located. I have a '28 Dictator second series ('27 type body with '29 type engine). I'm interested in parts, but need to know where you are so I know if I can get them easily. Thank you! Keith Link to comment Share on other sites More sharing options...
(S) Posted October 31, 2019 Author Share Posted October 31, 2019 I'm in WA State. We are slowly taking the car apart- so perfect timing. Shipping is no problem, I ship regularly dealing only in Stude parts... Link to comment Share on other sites More sharing options...
hadhec Posted November 21, 2019 Share Posted November 21, 2019 what is the block like? Link to comment Share on other sites More sharing options...
(S) Posted November 21, 2019 Author Share Posted November 21, 2019 Not sure without taking it apart some more. It was clean and fresh, but looks like a pinch bolt was wrong and scored a cylinder wall then it sat. I have seen this on many late Studebaker engines, but not sure if these share that design. I assume they do. I am trying to get it apart without forcing it. It 's head may be good, may have a crank and a few internals . Not sure if it will come apart before Winter. I may have found another one left over from a hot rod project but have no data on it yet. . If you are looking PM me. Link to comment Share on other sites More sharing options...
Hans hermann Posted November 23, 2019 Share Posted November 23, 2019 I’m looking for a water pump for a 1929 commander 6cyl Link to comment Share on other sites More sharing options...
(S) Posted November 24, 2019 Author Share Posted November 24, 2019 I do not have a parts book. Maybe someone knows if it is the same? Link to comment Share on other sites More sharing options...
STUDE48 Posted November 24, 2019 Share Posted November 24, 2019 Pictures? Link to comment Share on other sites More sharing options...
Hans hermann Posted November 24, 2019 Share Posted November 24, 2019 Link to comment Share on other sites More sharing options...
rbk Posted November 26, 2019 Share Posted November 26, 2019 That is a light six engine design , same as the Dictator. What is wrong with your Waterpump? Where are you located? If you are not in a hurry I maybe able to find one. I am old and slow and it is too cold in the warehouse. Robert Kapteyn Joliet Illinois 815 two one two 2389 Link to comment Share on other sites More sharing options...
Hans hermann Posted November 26, 2019 Share Posted November 26, 2019 Rubel Castle is located in Glendora Ca. Just east of Los Angeles. We had it running in 2017 and the water pump started leaking, one of our volunteers removed it to fix it, we’re not sure where it is ,may be in pieces. We’re still looking. Hans Hermann 626 eight two four 6633 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now