Buick35 Posted August 9, 2019 Share Posted August 9, 2019 Hi,Probably a dumb question but is there supposed to be a cap or plug on the topside of my king pins? While greasing the front fittings while the fenders are off I noticed there were none. Thanks,Greg.If so,what size do I need,it's a 40 series? Link to comment Share on other sites More sharing options...
jvelde Posted August 10, 2019 Share Posted August 10, 2019 (edited) There are supposed to be dust caps on the top - on my '39, they are 1 inch diameter. Might measure the top opening to be sure that is the same on your '35 special. I think I found them at NAPA. Might be called Freeze Plugs or Expansion Plugs - domed shape that you insert and center punch to expand and seal the top opening. Edited August 10, 2019 by jvelde (see edit history) 3 Link to comment Share on other sites More sharing options...
Larry Schramm Posted August 11, 2019 Share Posted August 11, 2019 (edited) Is it a dust cap or is there a grease fitting that is supposed to be on the top of the king pin? Can you take a picture? Edited August 11, 2019 by Larry Schramm (see edit history) Link to comment Share on other sites More sharing options...
Buick35 Posted August 11, 2019 Author Share Posted August 11, 2019 I think it's just a dust cap,mine has a grease fitting on the side. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now