tcave Posted August 4, 2019 Share Posted August 4, 2019 I am well into restoration of my '36 Terraplane pickup, and have a question about seats. It has the original two -2-piece seats (backrest on the wall, cushion on the floor). With the extremely rusted state of the original floor, it was not apparent how the seat cushions attached to it. Towards the back of the plywood bottom of the cushion (the wood is original), there are indentations from a previous metal bracket having been attached (see pic 01z) but those parts are long gone. The Hudson engineers were pretty clever on how they did things, especially making a pickup out of a sedan, but how the seats attach to the floor is not very intuitive. If anyone might know how the bottom of the seat cushion attaches to the floor, it would be greatly appreciated. I've attached a couple of images to help describe the parts. Thanks in advance! Tom C, Tucson, AZ. Link to comment Share on other sites More sharing options...
Jon37 Posted August 4, 2019 Share Posted August 4, 2019 I would post this question on the Hudson Open Forum, as well as here on the AACA Forum. https://forum.hetclub.org/ Between the two forums you should be able to get some helpful answers. --Jon Link to comment Share on other sites More sharing options...
StillOutThere Posted August 10, 2019 Share Posted August 10, 2019 Post it on the Terraplane SEVEN page on Facebook and you'll have an answer. https://www.facebook.com/groups/TerraplaneSEVEN/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now