stakeside Posted July 23, 2019 Share Posted July 23, 2019 I am rebuilding my vacuum tank and looking for advice to place cork gasket. The cork gasket fits outside of raised lip and mates up with ridge on the inner tank. 1) do need both gaskets in the rebuild kit? 2) is there sealer required? The ridge seems high. Link to comment Share on other sites More sharing options...
nearchoclatetown Posted July 23, 2019 Share Posted July 23, 2019 That type uses one gasket. The older ones have a flange on the inner tank with the holes in too. That one uses two gaskets. 1 Link to comment Share on other sites More sharing options...
RichBad Posted July 23, 2019 Share Posted July 23, 2019 You shouldn’t need any sealant on the gasket. I used none on mine and it’s fine although I did notice that I got a slight weep coming up through one of the screws so a little thread sealer may be helpful? 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now