belairbob50 Posted June 21, 2019 Share Posted June 21, 2019 Question #1, How do I put the ash tray back into the dash? I saved all the fastners, but can not get it to go back the correct way. Question # 2, The steering wheel has quite a bit of movement before contact is made. How do I adjust the steering gear? Link to comment Share on other sites More sharing options...
Spinneyhill Posted June 21, 2019 Share Posted June 21, 2019 #2. I don't know what system it uses, but this topic has a couple of posts of instructions for earlier Gemmer boxes: Link to comment Share on other sites More sharing options...
Spinneyhill Posted June 21, 2019 Share Posted June 21, 2019 And this is what MoToR's Manual says about Chrysler 1935-37 (Gemmer [2]). Between the earlier and later you should be able to work it out. Link to comment Share on other sites More sharing options...
Parrish Posted August 3, 2019 Share Posted August 3, 2019 Wally, sorry it took so long to get back. We had a family crisis to deal with. My 34 CA ash tray is epoxied in place. I did not do it and am stuck with it (no pun intended). Getting ready to sell. Stay tuned. Link to comment Share on other sites More sharing options...
belairbob50 Posted September 11, 2019 Author Share Posted September 11, 2019 Spinneyhill, thanks for posting the information. I have not had a chance to really address the problem correctly. Probably going to be a winter project now. Parrish, thanks for getting back to me. This also will be a winter project. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now