Recommended Posts

Posted (edited)

Something along this type is what you will probably need. Looks fabricated. You rarely see a trunk rack on a DB of your type.

DB rear.jpg

Edited by keiser31 (see edit history)

Share this post


Link to post
Share on other sites

If it is a trunk rack you need I have one that reportedly came from a Studebaker.

Reply here if you want me to take a picture.

Some guy wandered into my swap meet space and identified it and I think I wrote the application on the tag that is on it.

Will sell quite reasonably if you can make it work,

Share this post


Link to post
Share on other sites
3 hours ago, JACK M said:

If it is a trunk rack you need I have one that reportedly came from a Studebaker.

Reply here if you want me to take a picture.

Some guy wandered into my swap meet space and identified it and I think I wrote the application on the tag that is on it.

Will sell quite reasonably if you can make it work,

I hope I could make it work. 

Share this post


Link to post
Share on other sites

That looks to be mostly home made to me. The cross bars are just angle iron and the strips are just flats. The tire carrier and the ends might be correct.

Share this post


Link to post
Share on other sites
18 hours ago, Spinneyhill said:

That looks to be mostly home made to me. The cross bars are just angle iron and the strips are just flats. The tire carrier and the ends might be correct.

 

Could be...

To the OP

I don't know much about the authenticity on passenger car parts. Was just passing along the info to see if it helped.

Share this post


Link to post
Share on other sites

Here is a photo of the trunk rack I have. It is factory made and has the makers tag on the right side. I should have taken a photo of the tag. The rack is in Fremont close to you. 

 I am not sure how the original bumper might fit along with the rack.

trunk rack.jpg

  • Like 1

Share this post


Link to post
Share on other sites

What I find interesting is that the spare tire carrier is on these racks. Mine and other sedans and tourings have a threaded rod on the back where the spare carrier screws on to. 

Share this post


Link to post
Share on other sites

This is the trunk that came with the car. It does not look oe. Since you can not fit the spare someone put a cutout on the drivers front fender for a spare to sit in the well. And they drilled a hole in the cowl to mount the spare. 

B378FC36-37EB-4068-8E1D-7BB196C3B893.jpeg

D914F3B4-ED9F-4236-A55A-41E611FD2FCF.jpeg

75D00654-E842-4984-B1FB-92D4C4201B3C.jpeg

40692C14-CB29-49BB-BF60-FC54394A7DC8.jpeg

Share this post


Link to post
Share on other sites
12 hours ago, Bob Scafani said:

It is factory made and has the makers tag on the right side

 

Can you post a pic or the name of the manufacturer of the rack ? Just trying to learn and make notes for future

Share this post


Link to post
Share on other sites
On 5/4/2019 at 4:22 PM, JACK M said:

If it is a trunk rack you need I have one that reportedly came from a Studebaker.

Reply here if you want me to take a picture.

Some guy wandered into my swap meet space and identified it and I think I wrote the application on the tag that is on it.

Will sell quite reasonably if you can make it work,

I would love to see a picture 

Share this post


Link to post
Share on other sites

Sorry to have dropped the ball.

It will be a couple of more days until I get over there again but will do.

Share this post


Link to post
Share on other sites

Here it is.

 

2019-04-14 Dougs blown engine 001.JPG

2019-04-14 Dougs blown engine 002.JPG

2019-04-14 Dougs blown engine 003.JPG

2019-04-14 Dougs blown engine 004.JPG

2019-04-14 Dougs blown engine 005.JPG

2019-04-14 Dougs blown engine 006.JPG

2019-04-14 Dougs blown engine 007.JPG

2019-04-14 Dougs blown engine 008.JPG

Share this post


Link to post
Share on other sites

That is the same style of rack as on my 1930 Dodge Brothers Eight. Bolts to the end of the chassis. Mine has different mounts on the rear fuel tank cover pan.

Share this post


Link to post
Share on other sites

For twenty bucks a guy could make some mounts.

I guess I could box it up but would rather just have it picked up.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...