27dodger0 Posted April 27, 2019 Share Posted April 27, 2019 Of the 3 nuts, I loosened the 2 nuts toward the radiator, but don't know what direction the far left nut should turn. It is very tight now in either direction, and I don't want to break anything. Any and all help is appreciated!! Chuck 27dodger0 jaehawks@msn.com Link to comment Share on other sites More sharing options...
Minibago Posted April 28, 2019 Share Posted April 28, 2019 All the water pump nuts turn the same way Looking from above under the bonnet (Hood) To tighten turn towards the engine block To undo turn away from the engine block easier than remembering which is left hand and which is right hand Link to comment Share on other sites More sharing options...
27dodger0 Posted April 28, 2019 Author Share Posted April 28, 2019 Thanks for your reply!! I figured that all the nuts turned right to tighten, and left to loosen!! Don't know where you're from, but an age old phrase is "Rightie Tighte, Leftie loosen,"!! Very much thanks for your input!! Keep on Dodgen!! Chuck 27dodger0 Link to comment Share on other sites More sharing options...
Minibago Posted April 28, 2019 Share Posted April 28, 2019 Hi Chuck, I hail from Melbourne Australia. Yes, normally things are straight forward but when things are in rotation the action of the rotation can cause fasteners to loosen so on occasion we have items that are left hand thread. It can be confusing with the water pump remembering which nut is left hand and which is right hand so I use the KISS priciple. Keep it simple. Nige. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now