63 Red Riv Posted April 24, 2019 Share Posted April 24, 2019 Hello, going to fix a small dent in rear fender and want to remove the rear fender upper ornament grille. Any advice or tips would be appreciated. Thanks, Brian Link to comment Share on other sites More sharing options...
telriv Posted April 24, 2019 Share Posted April 24, 2019 Brian, I'll assume your talking about the trim piece above the trunk lid & below the rear window. If that's the one your talking about look under the trunk & below the rear window on the inside. You will see some quick nuts/pal nuts just remove them. You will see some sealer. DON"T FORGET to install new sealer called "dom dom"" OR "strip caulk" available at just about ANY auto parts/body shop supply store. Tom T. 1 Link to comment Share on other sites More sharing options...
63 Red Riv Posted April 25, 2019 Author Share Posted April 25, 2019 Tom, Its actually the 2 trim pieces under the back windows right behind the doors. Thanks, Brian Link to comment Share on other sites More sharing options...
Seafoam65 Posted April 25, 2019 Share Posted April 25, 2019 (edited) These are held on by screws that are only accessible by removing the rear quarter interior upholstered panel and removing the stops on the rear quarter window regulators so that the glass can roll down further than normal so that the glass doesn't block access to the screws. Edited April 25, 2019 by Seafoam65 (see edit history) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now