GOSFAST Posted April 16, 2019 Share Posted April 16, 2019 Looking for both intake and exhaust valve sizes, head diameters and lengths?? I'm certain they will have 3/8" stems? Don't have the heads here yet. Also looking for valve lock configurations, single groove, multi-groove, etc?? Thanks, Gary in N.Y. P.S. Need supplier also, want stainless only if possible!! Link to comment Share on other sites More sharing options...
keiser31 Posted April 16, 2019 Share Posted April 16, 2019 You might ask this gentleman where to get them.... Link to comment Share on other sites More sharing options...
JACK M Posted April 16, 2019 Share Posted April 16, 2019 (edited) www.hothemiheads.com for early Hemi parts. The guys (and gals) there are phone friendly and good help. The DeSoto would be a 330, Chrysler is a 331. If you want to post the STAMPED number found on the top front of the engine just in front of the valley cover I can confirm just what engine you have. There is not a lot of performance parts available for the DeSoto's. Not much will interchange between the Chrysler, DeSoto and Dodge first gen Hemis. (including the heads) Edited April 16, 2019 by JACK M (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now