39 Special

39 Special starter ring gear wanted!

Recommended Posts

Posted (edited)

I need a good or at least flipable flywheel ring gear for a 39 Special 248. Mine looks to have already been flipped, and it's in bad shape! On or off the flywheel!

Larry Elliott

Edited by 39 Special
Accursed autocorrect (see edit history)

Share this post


Link to post
Share on other sites
On 1/9/2019 at 3:21 PM, 39 Special said:

I need a good or at least flipable flywheel ring gear for a 39 Special 248. Mine looks to have already been flipped, and it's in bad shape! On or off the flywheel!

Larry Elliott

 

 Larry, I was able to clean up the leading edges of the teeth on my '50. I used a 3" hand held grinder with a thin grinding disk.  Several thousand miles and still going.

 

  Ben

Share this post


Link to post
Share on other sites
On 1/11/2019 at 7:34 AM, Ben Bruce aka First Born said:

 

 Larry, I was able to clean up the leading edges of the teeth on my '50. I used a 3" hand held grinder with a thin grinding disk.  Several thousand miles and still going.

 

  Ben

Thanks for the tip, Ben. Mine is really bad, with half of the teeth missing in spots ( where it usually stops!). It also looks to have been flipped before. I'm sure it'll be a big project, but worth the trouble, as I have a few leaks that will also get adressed on the way. I think I might have a picture some where, and if I find it, I'll post it. 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...