NC-car-guy

How buttercup got her groove back

Recommended Posts

13 minutes ago, JohnD1956 said:

 

It does look happy in the sunshine!   Something about the yellow color I presume!  Take it and the shop manual to a trans shop for resetting that reverse strut.  It will be money well spent in my opinion.

With labor rates at 100-125 per hour, I'll have to pass on that.  I do have a friend with a lift that I may "visit" as an alternative to laying on my back in a puddle of ATF.

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites

I'm just waiting on the video of you running and driving the car.  

  • Like 2

Share this post


Link to post
Share on other sites

Well.  I got reverse back!  But now I cant seem to get around the block without her getting hot and puking coolant out the overflow...😳😪😪  1 step forward 1 step back...

Share this post


Link to post
Share on other sites
27 minutes ago, NC-car-guy said:

Well.  I got reverse back!  But now I cant seem to get around the block without her getting hot and puking coolant out the overflow...😳😪😪  1 step forward 1 step back...

Great new on the reverse.

More info on the overheating:  hopefully no water in the oil or oil in the water or pressurized radiator when cold.  If you did not rod out the radiator then it is probably clogged ( it may have been marginal and working on the cylinder heads dislodged a  little bit of crud that made the radiator terminal).

  • Like 1

Share this post


Link to post
Share on other sites

What is it doing?  Needle shows hot when driving?  Only burps up when you shut down the engine?  

  • Like 1

Share this post


Link to post
Share on other sites

Needle goes to hot and the overflow tube starts steaming while driving. No signs of fluid mixing and radiator is not pressurized when cold.  It was kinda dirty steam last time so i added some radiator flush. Guess I gotta find a shop willing to clean the radiator.

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, NC-car-guy said:

Well.  I got reverse back!  But now I cant seem to get around the block without her getting hot and puking coolant out the overflow...😳😪😪  1 step forward 1 step back...

 

 HOW?

 

  Ben

Share this post


Link to post
Share on other sites

i just keep driving it till warm and trying reverse

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, NC-car-guy said:

Needle goes to hot and the overflow tube starts steaming while driving. No signs of fluid mixing and radiator is not pressurized when cold.  It was kinda dirty steam last time so i added some radiator flush. Guess I gotta find a shop willing to clean the radiator.

 

May be a stuck thermostat.  

Edited by JohnD1956 (see edit history)

Share this post


Link to post
Share on other sites
2 minutes ago, JohnD1956 said:

 

May be a stuck thermostat.  

I tested it before install. But I suppose it could be.  I was gonna get the radiator cleaned and order a new cap...

Share this post


Link to post
Share on other sites

I would say radiator.  The heads where off. Jackets probably looked over on the head you had the valve replaced.  Quite possibly the newly running engine full of scale from sitting is now loose in the system getting caught up in the radiator.  Maybe try a good flush with panty hose trick to filter any debris.  Whatever you do, don't let it stay in a running overheating condition or parts start to deform and gaskets go south. 

 

 

 

Share this post


Link to post
Share on other sites

That cannot hurt.  

5 minutes ago, NC-car-guy said:

I tested it before install. But I suppose it could be.  I was gonna get the radiator cleaned and order a new cap...

 

But I have seen a thermostat fail to open when first installed, just to open the next time the engine is run.  I think that is caused by an air bubble forming while the system is filled and no coolant hitting the bottom of the thermostat.   In the process of cooling off it seems the air bubble dissipates.

 

One way to tell is opening the cap and letting the engine warm up to look for flow in the top tank.  But if it is  a stuck thermostat then as it warms up it will regurgitate and spout hot antifreeze from the radiator cap opening.  Naturally the hot antifreeze will ruin your new engine paint.  

  • Thanks 1

Share this post


Link to post
Share on other sites
36 minutes ago, avgwarhawk said:

Looking a bit deflated today. 

 

Yea.  Has been sitting there the last two weeks.  Maybe once I can get the radiator done, I'll pump up the tire and move the car

Share this post


Link to post
Share on other sites
6 hours ago, NC-car-guy said:

Yea.  Has been sitting there the last two weeks.  Maybe once I can get the radiator done, I'll pump up the tire and move the car

 

C'mon you can do this. I have faith... don't punish the car... 🙂

  • Thanks 1

Share this post


Link to post
Share on other sites
19 hours ago, NC-car-guy said:

Yea.  Has been sitting there the last two weeks.  Maybe once I can get the radiator done, I'll pump up the tire and move the car

 

On the bright side, that door/fender gap looks great!  ;)

  • Like 1

Share this post


Link to post
Share on other sites
3 minutes ago, EmTee said:

 

On the bright side, that door/fender gap looks great!  ;)

 

Look on sunny side of life! 

  • Like 1

Share this post


Link to post
Share on other sites

Radiator is out and ready for the shop.  No reverse this morning...

20200321_112700.jpg

  • Like 2

Share this post


Link to post
Share on other sites
15 hours ago, 38Buick 80C said:

 

C'mon you can do this. I have faith... don't punish the car... 🙂

You're right, not the cars fault.  It just doesn't bring me joy.  I dread working on it so it sits in the yard.  Doesn't help that going on 40 and in a place in my life where I am just squeaking by check to check.   I need a hobby I enjoy and can afford. 

Share this post


Link to post
Share on other sites
Posted (edited)

Might be losing prime. Get the there cooler box fixed up and the tackle thentransmission with a bit of Lucas.  My 60 started losing prime after a trans fluid change.  Dropping a qt of the new fluid and added Lucas to thicken. Worked like a charm.  My trans is low mileage like yours. 

Edited by avgwarhawk (see edit history)
  • Like 1

Share this post


Link to post
Share on other sites
5 minutes ago, NC-car-guy said:

You're right, not the cars fault.  It just doesn't bring me joy.  I dread working on it so it sits in the yard.  Doesn't help that going on 40 and in a place in my life where I am just squeaking by check to check.   I need a hobby I enjoy and can afford. 

 

This is a tough position! Let me start from the end.  There are no affordable hobbies. Even gardening can be expensive. But it helps to focus on something that brings you joy.

 

40 is a scary time.  For many it is a perception that things are moving forward while perhaps you think you are stagnant. Or maybe an awakening to one's mortality, and that there may not be enough time to accomplish what you want to do.  But from my experience it is actually a time when magic happens.  You may suddenly realize that opportunities exist and you're qualified to step into them.  Things can happen fast, so regardless of how you currently feel, keep your eyes open and be available. 

 

Examine the "doesn't bring me joy" comment.  Is it just related to Buttercup?  Or the other assets too?   I worked with a fellow who was heavy into old cars.  I never did see his collection but was led to believe he had 3 cars all fully restored.  We used to talk at work and one day he told me that he had grown tired of the cars and decided to let em all go.  It was a bad decision.  Several years later he missed the whole thing and then found it was hard to replace what he had.  He told me " hang on to what you have!"  Even if you are tired of it, just put it on the side.   These were wise words.

 

If you are truly tired of the cars, do what needs to be done to store em best you can.  And wait a few years to make sure you really do not want them before letting them go. 

 

Also consider what each vehicle really needs,  and then build a plan that will allow you to refurbish what has to be done on each to advance your enjoyment of them.  Big projects and little ones.  One year I just replaced the outside mirrors and the gas tank door guard on the '56 and I was done for that year. 

 

Make it a multi year plan.  It's okay.  Nothing has to be finished in a day.  You have put a lot of time and effort into Buttercup to bring her back.  You have restored her inner and outer beauty.   It is okay to take a break from it for a while.  But I think it is best to keep her running, even if not driving it locally, now that you have gone as far as you have with it. .   

  • Like 7
  • Thanks 1

Share this post


Link to post
Share on other sites

In my line of work they teach to never give up!

Share this post


Link to post
Share on other sites
44 minutes ago, Elpad said:

In my line of work they teach to never give up!

 

Posted with all good intentions.

1172314955_DontEverGiveUp!(2).thumb.jpg.777c09507d794df04fa98f254c454dd3.jpg

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now