Jump to content

pull strap


Recommended Posts

First I suggest you remove the screw from the other end and try it in the end that is presently disconnected. There is a possibility that the threads are stripped. If the threads are ok..then find a replacement screw.

If the threads are stripped you will need to remove the door panel and repair the "nut" end. This could be a threaded insert, a tinnerman clip, or a nut attached to the back side of the sheet metal. The fix all depends on what tools you have ......

Link to comment
Share on other sites

Guest Greg Ross

Not certain about the '90 but on the '88-'89 a slender 1/4 " drive 10 mm socket is required. Your standard Socket Set will not have this slender style of socket, suggest a trip to a well stocked Auto Parts Store to locate same. wink.gif

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...