stefani 3 Posted October 4, 2018 Hello Lincoln Friends i want to convert the 1948 Lincoln Continental Convert. dismantle the complett where are the screws i have to repaint the Frame because the aluminum oxidizes Thank you your help Greetings from Switzerland Stefani Share this post Link to post Share on other sites
larry butcher 16 Posted October 5, 2018 Stefani, Please resubmit your post again , having trouble understanding just what you want to do. There is a lot of knowledge of these old Lincolns on this Club site. Post pictures if you can. Don't give up! Share this post Link to post Share on other sites
stefani 3 Posted October 7, 2018 Many thanks Larry Butcher Question at the Lincoln Continental Convertible 1946-1948 is the Windshild Frame bolted then you can dismantle him I want to know where the screws are and how many.Many thanks for the Information ! Maybe there is a restorer inthe USA who has alredy that ! if he really wanted to restore the Lincoln. Many thanks for answers from Lincoln specialist ! Stefani Share this post Link to post Share on other sites
19tom40 62 Posted October 7, 2018 Can you post a photo like this and mark the parts that you want to remove? Share this post Link to post Share on other sites
stefani 3 Posted October 7, 2018 Many Thanks 19 Tom 40 Photos Complet Remove Many thanks Stefani Share this post Link to post Share on other sites
19tom40 62 Posted October 8, 2018 If I understand you correctly, on USA made cars, that part is welded to the cowl and is not removed during a restoration. Share this post Link to post Share on other sites
stefani 3 Posted October 8, 2018 Thanks for the answer 19tom40 there are two diverent lincoln convertible 1 Typ lincoln Body type 876H76 convertible coupe because the windshild Frame is integratet in the bodywork I have the 2 Body type 876H56 lincoln Continental convertible and with this guy you have to disassemble the windshild Frame ! I hope there is still a lincoln specialist who knows lincolns. Thanks in advance Stefani Share this post Link to post Share on other sites
Tom_Overfield 38 Posted October 9, 2018 Stefaini, On my 41 Continental, I removed that windshield frame. Open the door and look carefully following the frame down into the hinge post. you should find two screws on each side (not the door hinges) these will need removed. Now go under the dash and you will find the bolts or screws holding it onto the body. Be very careful removing the frame. Work slow and you may have to use some penetrating oil where the frame is bolted into the tight fitting area on the doors.. hope this helps. Tom 1 Share this post Link to post Share on other sites
Tom_Overfield 38 Posted October 9, 2018 P.S. You’ll have to remove the inner windshield frame, save the screws 1 Share this post Link to post Share on other sites