budd28 Posted September 23, 2018 Share Posted September 23, 2018 I drove my car on Friday, and now when I engage the starter I get nothing. It also has the plunger all the way out . Any help will be appreciated. Thanks Budd Link to comment Share on other sites More sharing options...
Brian_Heil Posted September 23, 2018 Share Posted September 23, 2018 (edited) Not much to go on. A guess would be to check that the starter brushes are both making contact and that the commutator is clean and bright Edited September 24, 2018 by Brian_Heil (see edit history) Link to comment Share on other sites More sharing options...
ROD W Posted September 24, 2018 Share Posted September 24, 2018 There has been a lot of discussion on these starter/generators in the past on this forum. Go back over previous topics. But as Brian said, to start with check the brushes. Remove the cover on the back of the s/g, get somebody to stomp on the starter pedal and check that the generator brushes are disengaging and the starter brushes are engaging. Also ensure the battery is fully charges and all the connections are tight including the earth/ground. 2 Link to comment Share on other sites More sharing options...
Mark Shaw Posted September 24, 2018 Share Posted September 24, 2018 First check that you have 6volt cables and firmly stomp on the starter pedal to be sure it makes good contact.. Link to comment Share on other sites More sharing options...
budd28 Posted September 25, 2018 Author Share Posted September 25, 2018 Thanks everyone I found the issue after looking it was a ground problem. Problem solved now back on the road 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now