KINGPINS NEEDED - 1915 HUDSON

[Marty Roth 2,755]

I need a set of kingpins for my 1915 Hudson SIX-40.

Can you suggest where these might be found?

Or maybe a vendor?

 

Thanks in advance for any suggestion

Edited August 2, 2018 by Marty Roth (see edit history)

[Curti 580]

If you have a sample, I can get them made.

[brasscarguy 65]

If there is a flame spraying machinist in your area they can be flame sprayed oversize and precision ground back to standard. I have used this process on many worn pins and king pins. The cost runs about $75,00 per pin . Much cheaper than making new pins.

 

just sayin'

 

brasscarguy