Dennis in CT Posted July 19, 2018 Share Posted July 19, 2018 So I am throwing this out there to you Caddy guys with the hope that one of you can help. I recently ordered and installed 4 discs on my 54 Cad which I purchased through Caddy Daddy. No issues installing, but I no matter what I do, manually bleed or power bleed, I CANNOT get a hard pedal - instead it is squishy. There are no fluid or air leaks, and I have bench tested the Master several times - it seems fine. When I have plug the front and rear ports, pedal is hard a rock. I have tried isolating the issue by blocking just the rear port, then bleeding the front calipers (and vice versa) and I still get a squishy pedal. So it would appear that all things point to the master, but why does it work on the bench? I am thinking that maybe the bore size is wrong? I have mounted the new MC in the same exact spot as the old one, which means it is just below or sorta even with the calipers, so perhaps I need to install 2 lb residual valves? But would that really make for such a squishy pedal? Hoping some brake genius is out there that can help - many thanks Link to comment Share on other sites More sharing options...
rb6673 Posted July 23, 2018 Share Posted July 23, 2018 MAKE SURE ALL OF YOUR BLEADERS ON THE CALIPERS ARE ON TOP OR IT WILL NOT BLEED RIGHT. YOU ALSO MAY NEED A EQUALIZER VALVE. IF YOU ALREADY HAVE ONE CHECK THAT IT IS OPERATIONAL. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now