Eliminate door dings in your garage

[AZVET]

I'll pass this along.  I learned about it on the Corvette Forum.  Their example was made from a pool noodle.  I used a scrap piece of pipe insulation.  This prevents the Reatta door from putting dents in  the car that is parked next to it in the garage.

 

[Cargirl]

Sounds like a good idea! I think I will had those out for free to people that park next to me at car shows

 

[Labrat]

Split a noodle and put it on your motorhome wipers when not using. 

[Barney Eaton]

I have a parking space that is 13 ft wide but there is a brick wall on one side and a cement block wall on the other.

I can park the car offset so I can open one door fully but to be safe,  I put a bumper on both walls.

I used a full length of the foam tube (they are 5 or 6 ft)  then installed a piece of 1/2 inch PVC pipe inside.

by heating the PVC ends I could flatten them ....drill a hole in the end and screw them to the wall,  it sags slightly in the middle but the doors don't hit the walls.