Lincoln 1932-39 V12 replicated Auto-Lite IGM-16 rotors

[AB-Buff]

After two years for searching for a NOS Auto-Lite IGM-16 rotor and not finding one I decided to do a limited run of IGM-16 rotors.  These rotors are made from a nearly unbreakable polyurethane (you will not break one with normal usage). They come with a new conductive graphite button .050” longer than stock and a new spring.  These are made in a very limited number and will not be available forever. If you need one now is the time to pick one up.  You will get a rotor very similar to the one pictured here.

These are quality rotors, the fit onto the distributor shaft is a nice push fit, no wobble. You can see the parts that make up the rotor above, nicely machined and soldered together, when finished and oven curd at 180 degrees each rotor is machined on a rotary table to the correct diameter, this also insures that the rotor is concentric with the distributor shaft. They are not a cheap reproduction.

$120.00 shipping $7.20 for 1 to 10 rotors

Lynn 209-815-1189 or daleljames@comcast.net