E_Johnson

WANTED - 1910 IHC Model F Roadster - Brass Troy Windshield Parting Strips - Channels

Recommended Posts

WANTED for 1910-11 IHC Model F Roadster: the two brass parting strips (channels) that separate the upper and lower panes on a brass Troy windshield.

 

See photo below - the red arrows are pointing at the parting strips. 

 

The parting strips are 39.5" long. The outer measurement of the channel is 5/16". The inner measurement of the channel is 1/4" x 1/4". Refer to drawing below. 

 

I mainly need just the parting strips but if you have a partial or complete brass Troy windshield, I would also be interested in purchasing. 

 

If you have parting strips from another brand of windshield such as Rands, Victor, Standard, Metzger, etc. that I may be able to adapt to my situation, I may also be interested in them. 

 

Or, if you know someone who can fabricate the parting strips, please let me know. 

 

Thank you for your help. 

 

622945311_HighResolutionColor.jpeg.a5c680fefc23195b0d08df04b7eaec5b.jpeg

 

687337795_Diagramcopy.jpg.2c5924a2d6b6faba4cbc6232502e18b3.jpg

Share this post


Link to post
Share on other sites

i'm sorry I can't help with the part, but if you need specific measurements, it may very similar to the pieces on my 1910 IHC J-30. Let me know if I can send pictures etc. (but not the part. sorry)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now