ski.dive Posted May 26, 2018 Share Posted May 26, 2018 (edited) I need instructions on removing my 'CRT SCREEN'-so I can 'test' another CRT screen Do I need to disconnect the battery? Are there lots of wires to remove from the back? Edited May 26, 2018 by ski.dive (see edit history) Link to comment Share on other sites More sharing options...
harry yarnell Posted May 26, 2018 Share Posted May 26, 2018 What's a CTR screen? Link to comment Share on other sites More sharing options...
handmedownreatta Posted May 26, 2018 Share Posted May 26, 2018 it just unbolts once you remove the trim. Link to comment Share on other sites More sharing options...
Cargirl Posted May 26, 2018 Share Posted May 26, 2018 Always disconnect the battery when working on electrical items, you will avoid lots of potential troubles that way. Link to comment Share on other sites More sharing options...
Barney Eaton Posted May 26, 2018 Share Posted May 26, 2018 Start by prying off the cover for the center panel of the instrument cluster.....it is just held in place with spring clips....pull from the bottom When that is removed....you will see screws that hold the left and right cover bezels....remove screws and the trim bezels sort of hinge out away from the dash. With the bezel removed you will see the screws that hold the CRT Link to comment Share on other sites More sharing options...
padgett Posted May 27, 2018 Share Posted May 27, 2018 Are two connectors on the back, one for touchscreen overlay and other for CRT. Shown are both Reatta (silver) and Riviera (gold). They interchange. Major problem with used is that the crt often has burn-ins not visible when off unless you remove the touchscreen. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now